Feature

Over the side immersion heaters are specifically designed such that they can be installed in the upper portion of tanks. The substance to be heated is either below the industrial tank heater or onto one side, hence the name. The main advantages of this approach are that ample space is left in the tank for other operations to take place and the heater can easily be removed when the required temperature is achieved within the substance. The heating element of an over the side process heater is usually made from steel, copper, cast alloy and titanium. A coating of fluoropolymer or quartz can be provided for protection.

Application

Water heating

Freeze protection

Viscous oils

Storage tanks

Degreasing tanks

Solvents

Salts

Paraffin

Caustic solution

FAQ

1.Are you factory?
Yes, we are factory, all customers are more than welcome to visit our factory .

2.What are the available product certifications?
We have certifications such as: ATEX, CE, CNEX. IS014001, OHSAS18001,SIRA, DCI. Etc

3.What are the available heater fange type, sizes and materials?

WNH industrial electric heater, flange size between 6"(150mm)~50"(1400mm)
Flange standard: ANSI B16.5, ANSI B16.47, DIN, JIS (Also accept customer requirements)
Flange material: Carbon steel, Stainless steel, Nickel-chromium alloy, or other required material

4.What is the maximum design temperature?
Design temperatures up to 650 °C (1200 °F) are available based on customer specifcations.

5.What is the maximum power density of the heater?
The power density of the heater must be based on the fluid or gas being heated. Depending on the specific medium, the maximum usable value can reach 18.6 W/cm2 (120 W/in2).